Specifications
The control panel must:
- be installed at a maximum distance of 8 feet from an electrical outlet. Otherwise, you will need to extend the cable wire.
- be connected to Internet via Wi-Fi or via Ethernet cable to enable remote control and remote notifications
- If using a multi band router, the Wi-Fi network must have different SSID for the broadcast frequencies (2.4GHz and 5GHz)
- The SSID and password must not contain special characters
- Connected to a router with B or G protocols enabled
- be a maximum distance of 60 feet cable length from the valve.
- have a space behind or below to install the valve controller box that is used to bridge the control panel and the valves
- be in a good RF (Radio Frequency) environment. Try to avoid placing mirrors, reinforced concrete walls, metal plates, etc., between the panel and sensors (direct line of sight) for optimum RF performance
Physical Dimensions
Control Panel
Width: 7.4”
Height: 5.5”
Depth: 1.2”
Valve Controller
Width: 4.6”
Height: 2.3”
Depth: 1.1”
Power Specifications
Power Supply Input: 100-240VAC 50/60Hz 0.6A Max
Power Supply Output: 9V 2A
Battery Backup Output: 7.2 VDC, 2200 mAH
Battery Type: NiMH – Custom Battery Pack – NOWBAT360
The technical data sheet of the NOWA 360 control panel (NOWMA360) is attached.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article